Operating Instructions for Standard Tapping Sieve

Add 10 kg of lubricating oil before startup. Verify that the rotation direction conforms to the arrow marked on the motor housing; reverse rotation is forbidden.

Place the sieve stack loaded with samples on the lower tray, then adjust the lifting bracket to clamp the sieve stack tightly between the upper tray and lower tray.

Precautions

Adjust the lifting bracket and tighten the wing nut.

Always maintain a persistent oil film on the top surface of the machine cover to avoid rust spots.

Regularly lubricate all moving components and refill oil periodically to extend service life.

The complete machine shall be installed at a fixed position to reduce shaking.